faust-internal-metering

Faust MCP Internal Metering

By default, the Faust MCP automatically adds RMS/Peak meters on the DSP outputs. Add measurement points anywhere in the signal graph to debug intermediate stages or to expose custom probes to get_audio_metrics().

Using debug.lib

Faust provides a debug.lib library that includes the standard probe_* functions with UI bargraphs and [probe:N] metadata already wired in. It also supports a DEBUG compile-time switch so probes can be compiled out entirely.

Example:

import("stdfaust.lib");
db = library("debug.lib");

process = _ : db.probe_rms_db(0, 1) : db.probe_peak_db(1, 1);

Compile out probes for release builds:

process = _ : db[DEBUG=0;].probe_rms_db(0, 1);

Standard probe bargraphs

If you use debug.lib, you already have the standard probe definition at https://raw.githubusercontent.com/grame-cncm/faustlibraries/refs/heads/master/doc/docs/libs/debug.md or https://raw.githubusercontent.com/grame-cncm/faustlibraries/refs/heads/master/debug.lib

The [hidden:1] metadata hides the metering probes in the GUI. Keep them visible when you want to help developers debug, or hide them when not needed.

Usage

Measuring an intermediate signal (probe ids)

// Measure after oscillator, before filter
osc = os.sawtooth(freq) : db.probe_rms_db(0, 1);
filtered = osc : fi.lowpass(2, cutoff) : db.probe_peak_db(1, 1);
process = filtered;

Mixing dB + linear probes

osc = os.sawtooth(freq) : db.probe_rms_db(2, 1);
env = en.adsr(0.01, 0.1, 0.7, 0.3, gate) : db.probe_peak_lin(3, 1);
process = osc * env;

Measuring multiple points

import("stdfaust.lib");

freq = hslider("freq", 440, 20, 2000, 1);
gain = hslider("gain", 0.5, 0, 1, 0.01);
gate = button("gate");

// Pipeline with probes at each stage
osc = os.sawtooth(freq) : db.probe_rms_db(0, 1);
shaped = osc * en.adsr(0.01, 0.1, 0.7, 0.3, gate) : db.probe_rms_db(1, 1);
output = shaped * gain : db.probe_rms_db(2, 1);

process = output <: _,_;

Reading Values

Probe bargraphs appear in get_param_values() with their raw values (linear if you emit linear, dB if you emit dB). Example paths for the standard probe labels:

{
  "path": "/dsp/Probe_RMS_dB_0",
  "value": -16.9
},
{
  "path": "/dsp/Probe_Peak_dB_1",
  "value": -14.0
},
{
  "path": "/dsp/Probe_RMS_dB_2",
  "value": -12.3
}

Probes containing [probe:N] are returned in get_audio_metrics():

{
  "probes": [
    { "id": 0, "value": 0.57 },
    { "id": 1, "value": 0.42 }
  ]
}

These values are directly comparable with get_audio_metrics() output when the probes are linear (or when you use [unit:dB] and the conversion to linear is applied).

Use Cases

1. Debug a disappearing signal: Add meters at each stage to locate where the signal drops to zero or becomes NaN.

2. Check levels before/after an effect: Compare the gain of a filter or distortion.

3. Monitor an envelope: Verify that the ADSR rises and falls correctly.

4. Detect internal clipping: Find where the signal exceeds 1.0 before the final output.

Notes

• attach(x, y) passes x through unchanged, but forces computation of y (side-effect for the bargraph)
• Meters add slight CPU overhead (0.1s RMS/Peak window)
• Use groups (h:Debug/...) to organize meters in the UI
• If you want get_audio_metrics() to convert dB to linear, include [unit:dB] in the bargraph label
• Values are linear (not dB) for easy comparison: 0.5 = half amplitude, 1.0 = full scale, > 1.0 = clipping