Run Tutorial Walkthrough

Walk through a training tutorial lesson as a learner would, progressively building code, running commands, and verifying the learning journey works end-to-end.

---

Operating Modes

This skill supports two distinct modes. Ask the user which mode if not clear from context:

Mode A: Learner Simulation (Progressive Build)

Walk through as a learner would, editing starter files progressively. Use when:

• Testing that tutorial instructions are complete and correct
• Verifying the learning path works step-by-step

Mode B: Documentation Verification

Run solution files and verify documentation matches actual outputs. Use when:

• Checking that code snippets, terminal outputs, and examples in docs are accurate
• Validating solution files work correctly

Key difference: In Mode A, you progressively edit starter files (then reset). In Mode B, you run solutions directly and check docs for accuracy.

---

Starter Files

Starter files (e.g., hello-nextflow/hello-config.nf) represent the end state of the previous chapter. They are the starting point for learners beginning a new lesson.

When to Edit Starter Files

| Scenario | Action | | -------------------------------------------------- | ----------------------- | | Bug or syntax error inherited from previous chapter | ✅ Fix and commit | | Changes made while running through exercises | ❌ Reset before committing |

After Testing

If you modified starter files while walking through exercises, reset them:

git checkout hello-nextflow/*.nf

Only keep changes to:

• Solution files (solutions/**/*) - these should be correct and complete
• Documentation (docs/**/*.md) - fix code snippets, outputs, examples
• Starter files with genuine bugs - errors that exist before the lesson begins

---

Skill Dependencies (MANDATORY)

This walkthrough MUST invoke other skills. Do not skip these.

| Checkpoint | Skill | Condition | |------------|-------|-----------| | Before Phase 2 | /docker-setup | If Docker environment selected | | Before Phase 2 | /validate | Always - check lesson structure first | | Phase 3 | /test-example | For each solution file |

---

Initial Setup

Use AskUserQuestion to determine:

1. Which tutorial/lesson to walk through (specific file, module, or side quest)
2. Environment: Docker (recommended) or existing local environment

Environment Setup

If Docker selected:

>>> STOP. INVOKE /docker-setup NOW.

Do not proceed until the container is confirmed running.

If existing environment: Verify Nextflow is installed with nextflow -version

Strict Syntax Parser (v2)

Always use the strict syntax parser when running Nextflow commands:

NXF_SYNTAX_PARSER=v2 nextflow run ...

In Docker:

docker exec -e NXF_SYNTAX_PARSER=v2 nf-training nextflow run ...

This validates tutorials against the strict syntax that will become default in future Nextflow versions.

---

Working Directory Mapping

See ../shared/repo-conventions.md for full directory mapping table.

Key pattern: documentation uses underscores (hello_nextflow), working directories use hyphens (hello-nextflow).

---

Common Documentation Issues

When verifying documentation (especially in Mode B), watch for these frequent problems:

Code Snippets

• Non-existent properties/methods: e.g., .process instead of .name
• Parameter name mismatches: e.g., params.greeting vs params.input
• Missing path prefixes: e.g., 'file.csv' vs 'data/file.csv'

Configuration Examples

• Profile parameter names must match the actual params block
• nextflow config output examples must match what the config actually produces
• Path values in test profiles must be valid relative to the working directory

Terminal Output Examples

• Version numbers (acceptable to differ from your run)
• Work directory hashes (acceptable to differ from your run)
• Process execution order (acceptable to differ)
• Error messages (must match if showing expected errors)

Work Directory Hashes (within docs - CRITICAL)

While your actual hashes will differ from documented ones, check that docs are internally consistent:

• Invalid hex: Hashes like [j6/abc123] contain invalid characters (only 0-9, a-f allowed)
• Copy-paste duplicates: Multiple different nextflow run commands showing identical hashes (unless cached)
• Prose mismatch: Text referencing a hash that doesn't appear in nearby output
• Cache confusion: Non-cached processes (no "cached: N") should have unique hashes per run

Before/After Code Blocks

• Verify "Before" matches the actual prior state
• Verify "After" produces working code
• Check that hl_lines highlight the correct lines (count from line 1 of snippet, not linenums)

---

Walkthrough Process

Use TodoWrite to track progress through phases and sections.

Phase 1: Preparation

1. Read the lesson file to understand the structure and sections
2. Identify starting files - What files should already exist vs. what the user creates
3. Prepare a clean working state - Reset or backup existing files to avoid conflicts
4. Verify prerequisites - Check that required data files and configs exist

CHECKPOINT: Validate Before Proceeding

>>> STOP. INVOKE /validate on the lesson file NOW.

Record any issues found. Do not proceed to Phase 2 until validation completes.

Phase 2: Progressive Execution

Complete steps 2.1-2.6 for each section before moving to the next. Do not batch sections together.

For each numbered section in the lesson:

2.1 Read and Understand

• Read the section instructions
• Identify what code changes are expected (Before/After blocks, inline snippets)
• Note what commands should be run

2.2 Verify Current State Matches "Before"

Before applying any code change:

1. Read the current file content
2. Compare with the "Before" block in the documentation
3. If they don't match, stop and report the discrepancy

2.3 Apply Code Changes Progressively

• Don't copy the final solution - Apply only the changes shown in this section
• Use the Edit tool to make incremental changes, mimicking how a learner would type
• If creating a new file, use the exact content shown at that point (not the final version)

2.4 Run Commands Exactly As Shown

• Execute bash commands in the order they appear using the Bash tool
• Use the exact syntax shown (don't "improve" or modify commands)
• Capture output for comparison
• If a section changes code but doesn't include a "run this" instruction, run the workflow anyway to verify changes work

2.5 Verify Outputs

• Compare console output with documented "Output" blocks
• See references/acceptable-differences.md for what to flag vs. ignore

2.6 Confirm Section Complete

Before moving to the next section:

1. Verify the workflow/script ran successfully (exit code 0)
2. Confirm output matches documentation (within acceptable differences)
3. Update TodoWrite to mark section complete

Phase 2B: Solution Testing (Mode B only)

For documentation verification mode, skip progressive editing of starter files. Instead:

2B.1 Run Each Solution Directly

nextflow run solutions/<lesson>/script.nf -c solutions/<lesson>/nextflow.config

2B.2 Test with Profiles (if applicable)

nextflow run solutions/<lesson>/script.nf -c solutions/<lesson>/nextflow.config -profile test
nextflow run solutions/<lesson>/script.nf -c solutions/<lesson>/nextflow.config -profile my_laptop,test

2B.3 Verify Config Resolution

nextflow config -profile <profiles>

Compare output against documented nextflow config examples in the lesson.

2B.4 Compare All Outputs Against Documentation

For each documented output block:

1. Find the corresponding section in the docs
2. Run the command/workflow
3. Compare actual vs documented output
4. Flag discrepancies (use acceptable-differences.md to filter noise)

2B.5 Verify Hash Consistency (MANDATORY)

Run these checks on ALL documentation files in scope:

# 1. Check for invalid hex characters in hashes
grep -oE '\[[^]]+\]' docs/path/to/*.md | grep -E '\[[^0-9a-f/\]]' | head -20

# 2. Find duplicate hashes (may indicate copy-paste errors)
grep -oE '\[[a-z0-9]{2}/[a-z0-9]{6}\]' docs/path/to/*.md | sort | uniq -c | sort -rn | head -20

For any duplicates found, verify they are legitimate:

• Same output shown twice (acceptable)
• -resume showing cached results from earlier in same lesson (acceptable)
• Prose reference to nearby terminal output (acceptable)
• Different nextflow run commands without -resume (NOT acceptable - flag as issue)

See references/acceptable-differences.md for detailed hash validation rules.

Phase 3: Final Verification

After completing all sections:

3.1 Compare Final Code with Solutions

Read the solution file and compare with what was built. Minor differences (whitespace, comments) may be acceptable. Report any significant differences.

3.2 Test Solution Files

>>> STOP. INVOKE /test-example on each solution file.

For each solution script, verify:
- Fresh run works
- Resume caches correctly
- Parameter handling (if applicable)
- Output matches documentation

Record results before proceeding.

3.3 Cleanup

Only if walkthrough succeeded with no issues:

• Reset modified files: git checkout "${WORKING_DIR}/"
• Remove work directories and logs

If issues found: Leave files in place for Phase 4. Save work directory paths for troubleshooting.

Phase 4: Propose Fixes and Create PR (if issues found)

If fixable issues were identified, follow references/pr-workflow.md to create a PR.

Key points:

• Categorize as auto-fixable vs. requires review
• Present fixes to user with actual section headings (read from document - do not guess!)
• Get user approval via AskUserQuestion before making changes

---

Output Format

Structure your report with these sections:

# Tutorial Walkthrough: <lesson-name>

## Environment
Mode, Nextflow version, working directory

## Section N: <exact title from document>
- State verification: matches "Before" ✓ or mismatch details
- Code changes applied
- Commands run with results

## Validation Results (from /validate)
## Solution Tests (from /test-example)
## Solution Comparison

## Summary
Sections completed, mismatches, failures, discrepancies

## Issues Found
Categorize as Critical / Warning / Minor

## Proposed Fixes (if any)
Table with file, line, current, proposed, reason

Mode B Output Format

# Documentation Verification: <module-name>

## Environment
Container name, Nextflow version, working directory

## Solutions Tested
| Solution | Base Run | With Profiles | Issues |
|----------|----------|---------------|--------|
| 1-hello-world | ✓ | N/A | None |
| 6-hello-config | ✓ | ✓ test | Fixed: .process→.name |

## Hash Consistency Check
- Invalid hex characters found: [list or "None"]
- Duplicate hashes across different runs: [list or "None - all legitimate"]
- Prose/output mismatches: [list or "None"]

## Documentation Issues Found

### Critical (breaks functionality)
- File: `06_hello_config.md`, Lines 893-931
  - Issue: `.process` property doesn't exist, should be `.name`
  - Also affects: `solutions/6-hello-config/hello-config.nf`

### Minor (cosmetic/clarity)
- ...

## Fixes Applied
| File | Change | Reason |
|------|--------|--------|
| docs/.../06_hello_config.md | `.process` → `.name` | Property doesn't exist |
| solutions/.../nextflow.config | `params.greeting` → `params.input` | Wrong parameter name |
| docs/.../03_config.md | `[f0/35723c]` → `[2b/9a7d1e]` | Duplicate hash for different run |

---

Special Cases

Exercises

When encountering ??? exercise blocks:

1. Attempt the exercise based on instructions given
2. Check against ??? solution block
3. Report if instructions are unclear or incomplete

Branching/Optional Steps

Some tutorials have optional paths:

• Note which path was taken
• Ask user if they want to test alternative paths
• Document any untested branches