Professional audio production for music, podcasts, and sound design. Use when working with audio recording, mixing, mastering, or sound design for any medium.
Comprehensive guide for professional audio production across music, podcasts, video, and interactive media.
SOURCE → CAPTURE → PROCESS → OUTPUT
Detailed:
┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐
│ Source │→→→│ Mic │→→→│ Preamp │→→→│Interface│
│(voice, │ │ │ │ │ │ (A/D) │
│ instr.) │ │ │ │ │ │ │
└─────────┘ └─────────┘ └─────────┘ └────┬────┘
│
▼
┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐
│Speakers │←←←│ (D/A) │←←←│ Mix │←←←│ DAW │
│Headphone│ │Interface│ │ Master │ │Recording│
└─────────┘ └─────────┘ └─────────┘ └─────────┘
| Concept | Definition | Standard | | ----------------- | ---------------------------- | ------------------------------- | | Sample Rate | Samples per second | 44.1kHz, 48kHz, 96kHz | | Bit Depth | Dynamic range resolution | 16-bit, 24-bit, 32-bit float | | Bit Rate | Data per second (compressed) | 128-320 kbps (MP3) | | Dynamic Range | Loudest to quietest | ~96dB (16-bit), ~144dB (24-bit) | | Headroom | Space below 0 dBFS | -6 to -18 dB typical |
20 Hz 20,000 Hz
├───────────────────────────────────────────────────────┤
SUB-BASS │ BASS │ LOW-MID │ MID │ HIGH-MID │ HIGH
20-60 │ 60-250 │ 250-500 │500-2k │ 2k-6k │ 6k-20k
│ │ │ │ │
Rumble │ Warmth │ Body │ Pres- │ Presence │ Air
Feel │ Punch │ Muddiness│ ence │ Harshness│ Sibilance
dBFS (Full Scale):
0 dBFS ████████████ Digital maximum (clipping)
-3 dBFS ██████████ Peaks (leave headroom)
-6 dBFS █████████ Recommended peak ceiling
-12 dBFS ███████ Average loud signal
-18 dBFS ██████ Recommended recording level
-24 dBFS ████ Conservative level
-60 dBFS █ Noise floor target
| Type | Principle | Best For | | ------------- | ---------------- | ------------------------------- | | Dynamic | Moving coil | Loud sources, live, durable | | Condenser | Capacitor | Studio vocals, acoustic, detail | | Ribbon | Thin metal strip | Vintage tone, smooth highs | | USB | Built-in ADC | Podcasts, convenience |
CARDIOID FIGURE-8 OMNI
╭─────╮ ╭───╮ ╭─────╮
╭─┤ ├─╮ ╭─┤ ├─╮ ╭─┤ ├─╮
│ │ │ │ │ │ │ │ │ │ │ │
│ │ ● │ │ │ │ ● │ │ │ │ ● │ │
│ │ │ │ │ │ │ │ │ │ │ │
╰─┤ ├─╯ ╰─┤ ├─╯ ╰─┤ ├─╯
╰─────╯ ╰───╯ ╰─────╯
Front pickup Front + Back All around
Target Peaks: -12 to -6 dBFS
Average Level: -18 to -12 dBFS
Why?
- Leaves headroom for processing
- Matches analog equipment sweet spot
- Prevents digital clipping
- 24-bit has plenty of resolution
Types:
- High-pass filter (HPF): Removes low frequencies
- Low-pass filter (LPF): Removes high frequencies
- Bell/Peak: Boost or cut specific frequency
- Shelf: Boost or cut above/below frequency
Common Applications:
┌─────────────────────────────────────────┐
│ Vocal: │
│ HPF at 80-100Hz (remove rumble) │
│ Cut 200-300Hz (reduce mud) │
│ Boost 3-5kHz (presence) │
│ Shelf boost 10kHz+ (air) │
├─────────────────────────────────────────┤
│ Kick Drum: │
│ Boost 50-80Hz (sub) │
│ Cut 300-400Hz (boxiness) │
│ Boost 3-5kHz (attack/click) │
├─────────────────────────────────────────┤
│ Electric Guitar: │
│ HPF at 80Hz │
│ Cut 400-600Hz if muddy │
│ Boost 2-4kHz (bite) │
└─────────────────────────────────────────┘
Parameters:
┌────────────────────────────────────────────────┐
│ Threshold: Level where compression starts │
│ Ratio: Amount of compression (4:1, 8:1, etc.) │
│ Attack: Time to engage (fast=punch, slow=body)│
│ Release: Time to disengage │
│ Knee: Hard (sudden) or soft (gradual) │
│ Makeup Gain: Restore lost volume │
└────────────────────────────────────────────────┘
Common Settings:
┌─────────────────────────────────────────┐
│ Vocals: 3:1-4:1, medium attack/release │
│ Drums: 4:1-8:1, fast attack │
│ Bass: 4:1, medium attack │
│ Mix Bus: 2:1-3:1, slow attack, 1-3dB GR│
└─────────────────────────────────────────┘
| Type | Character | Use | | ----------- | --------------- | ------------------- | | Room | Small, tight | Natural ambience | | Hall | Large, spacious | Orchestral, ballads | | Plate | Bright, smooth | Vocals, snare | | Spring | Vintage, boingy | Guitar, lo-fi | | Chamber | Warm, dense | Natural depth |
Key Parameters:
- Pre-delay: Time before reverb (50-100ms for vocals)
- Decay/RT60: How long it lasts
- Damping: High-frequency absorption
- Size: Room dimensions
- Mix/Wet-Dry: Balance with original
| Type | Application | | -------------- | ------------------------------ | | Slapback | 50-150ms, rockabilly, presence | | Stereo | Different L/R times, width | | Ping-pong | Alternating L/R, interest | | Tempo-sync | 1/4, 1/8 notes, rhythmic |
Signal Flow Levels:
┌─────────────────────────────────────────┐
│ Input: -18 dBFS (sweet spot) │
│ ↓ │
│ Plugin 1: Output matches input level │
│ ↓ │
│ Plugin 2: Output matches input level │
│ ↓ │
│ Fader: Unity (0 dB) ideally │
│ ↓ │
│ Bus: -12 to -6 dBFS peaks │
│ ↓ │
│ Master: -6 dBFS peaks (before limit) │
└─────────────────────────────────────────┘
Stereo Field:
Hard L L L-C CENTER R-C R Hard R
│ │ │ │ │ │ │
│ │ │ │ │ │ │
Rhythm Gtr1 Keys1 Vocal Keys2 Gtr2 Rhythm
Gtr BVox1 Bass BVox2 Gtr
Kick
Snare
Common Positions:
- Center (0): Lead vocal, bass, kick, snare
- Slight L/R: Main instruments, harmonies
- Wide L/R: Rhythm guitars, stereo keys
- Hard L/R: Doubled parts, effects
Making space (subtractive EQ approach):
┌────────────────────────────────────────────┐
│ Kick: Boost 60Hz │ Cut from Bass here │
│ Bass: Boost 80-100 │ Cut from Kick here │
│ Gtr: Owns 1-3kHz │ Cut vocal slightly │
│ Vocal: Boost 3-5kHz │ Cut guitar slightly │
└────────────────────────────────────────────┘
Each element should have its own frequency "home"
Typical Chain:
1. Subtle EQ (tonal shaping)
2. Light compression (2:1, 1-3dB GR)
3. Stereo enhancement (if needed)
4. Limiter (only for reference bounce)
Keep mix bus processing minimal!
Leave headroom for mastering.
| Platform | Target | Measurement | | ------------------ | -------------- | ----------- | | Spotify | -14 LUFS | Integrated | | Apple Music | -16 LUFS | Integrated | | YouTube | -14 LUFS | Integrated | | Broadcast (US) | -24 LUFS | Integrated | | Broadcast (EU) | -23 LUFS | Integrated | | CD | -9 to -12 LUFS | Integrated |
1. Reference Import
└─→ Compare to commercial releases
2. EQ (Linear Phase)
└─→ Broad adjustments only
3. Multiband Compression
└─→ Control specific bands
4. Stereo Width
└─→ Enhance or narrow
5. Limiting
└─→ Final loudness, prevent clipping
6. Dither (if needed)
└─→ 16-bit conversion only
Recommended Signal Chain:
Mic → Audio Interface → DAW
Equipment Tiers:
┌─────────────────────────────────────────┐
│ Budget: USB Mic (Blue Yeti, AT2020) │
│ Mid: SM7B + Cloudlifter + Interface│
│ Pro: Large diaphragm condenser │
│ + high-end preamp │
└─────────────────────────────────────────┘
1. Noise Reduction
└─→ Remove room noise, hum
2. De-essing
└─→ Tame harsh "s" sounds
3. Compression
└─→ Even out volume (3:1-4:1)
4. EQ
└─→ HPF at 80Hz, presence boost
5. Limiter
└─→ Catch peaks, -1 dBFS ceiling
Target: -16 LUFS (mono), -19 LUFS (stereo)
True Peak: -1 dBTP
Standard:
- Format: MP3 or AAC
- Bitrate: 128 kbps (mono), 192 kbps (stereo)
- Sample rate: 44.1 kHz
High Quality:
- Format: AAC
- Bitrate: 256 kbps
- Sample rate: 48 kHz
Chapters: Use ID3 tags for chapter markers
Artwork: 3000x3000 minimum, JPG or PNG
Approaches:
1. Recording: Capture real sounds (foley)
2. Synthesis: Create from oscillators
3. Sampling: Manipulate existing sounds
4. Processing: Transform through effects
5. Layering: Combine multiple sources
| Type | Method | Sound Character | | --------------------- | -------------------- | --------------------- | | Subtractive | Filter oscillators | Classic analog | | FM | Frequency modulation | Metallic, bells | | Wavetable | Morphing waveforms | Modern, evolving | | Granular | Tiny sound particles | Texture, pads | | Additive | Stack sine waves | Precise, organs | | Physical Modeling | Simulate physics | Realistic instruments |
Sound Design Stack:
┌─────────────────────────────────────┐
│ TOP: High frequencies (air, presence)│
│ MID: Character, tone │
│ LOW: Foundation, weight │
│ SUB: Felt, not heard (20-60Hz) │
│ TRANSIENT: Attack, punch │
└─────────────────────────────────────┘
Process each layer separately, combine at end.
| DAW | Strengths | Platform | | ---------------- | ---------------------------- | -------- | | Pro Tools | Industry standard, editing | All | | Logic Pro | Complete package, Apple | macOS | | Ableton Live | Live performance, electronic | All | | FL Studio | Beat making, workflow | All | | Reaper | Customizable, affordable | All | | Cubase | MIDI, composition | All | | Studio One | Modern workflow | All | | Audacity | Free, simple editing | All |
| Format | Type | Quality | Use | | -------- | ------------ | -------- | ------------------- | | WAV | Uncompressed | Lossless | Production, archive | | AIFF | Uncompressed | Lossless | Mac production | | FLAC | Compressed | Lossless | Archive, audiophile | | ALAC | Compressed | Lossless | Apple ecosystem | | MP3 | Compressed | Lossy | Distribution | | AAC | Compressed | Lossy | Streaming, Apple | | OGG | Compressed | Lossy | Games, open source |
For Mastering:
- Format: WAV
- Bit depth: 24-bit (or 32-bit float)
- Sample rate: Match session (typically 44.1/48kHz)
- Headroom: -6 dBFS peaks
For Distribution:
- Format: WAV or FLAC (lossless)
- Bit depth: 16-bit (with dither)
- Sample rate: 44.1 kHz
- Loudness: Platform target LUFS
npx skills add travisjneuman/audio-production下载完整 Skill 目录，包含 SKILL.md 及所有相关文件
Generate or edit images via Gemini 3 Pro Image (Nano Banana Pro).
Batch-generate images via OpenAI Images API. Random prompt sampler + `index.html` gallery.
Generate spectrograms and feature-panel visualizations from audio with the songsee CLI.
Extract frames or short clips from videos using ffmpeg.
Search GIF providers with CLI/TUI, download results, and extract stills/sheets.
Category:media-generate