coot-refinement

This skill provides guidance for effective and safe structure refinement in Coot, based on lessons learned from crashes and workflow optimization.

Critical Configuration

Set Immediate Replacement Mode for Scripting

ALWAYS call these two before any refinement operations in scripts:

coot.set_refinement_immediate_replacement(1)
# Makes refinement synchronous — results are committed immediately.

coot.set_imol_refinement_map(imol_map)
# Tells Coot which map to refine against.
# CRITICAL: without this, refine_residues_py() silently fails (returns -2 with no atoms moved).
# Call once per session, or whenever the active map changes.

Why: Enables synchronous operation where refinement directly updates coordinates. Without this:

• Refinement happens asynchronously in background threads
• Need to call coot.set_refinement_immediate_replacement() before using refinement functions (just once is enough) which should remove the risk of threading conflicts and crashes, race conditions between refinement and rendering.

When to use: Any time you're scripting refinement operations (refine_residues_py, refine_zone, etc.)

Safe Refinement Workflow

1. Enable immediate replacement

coot.set_refinement_immediate_replacement(1)

2. Set the refinement map

coot.set_imol_refinement_map(imol_map)

3. Refine residues (preferred method)

Pass a list of residue specs: [["A", 42, ""], ["A", 43, ""], ...]

residue_specs = [["A", resno, ""] for resno in range(start_resno, end_resno + 1)] result = coot.refine_residues_py(imol, residue_specs)

4. so-called "sphere refine" is often useful because it allows movement/improvement

of residues that are close in space but distant in sequence.

central_residue_spec = ['A', 12, ''] neigbs = coot.residues_near_residue_py(imol, central_residue_spec) residue_spec = neigbs residue_specs.append(central_residue_spec) result = coot.refine_residues_py(imol, residue_specs)

Hard-Mode-Soft-Mode-Hard-Mode

Some problems are of the kind where the geometry restraints "get in the way" of the atoms moving to the correct minimum. In such cases, you can try letting the refinement "go soft" - ie.

o Mediocre Refinement o increase the map weight (weight_matrix) by a factor of 10 or so. o Refine the same residues again o Restore the previous map weight o Refine the same residues again

This can sometimes be helpful to remove bad geometry or bad fit - atom clashes in particular.

Additionally, or perhaps at the same time, you can try to reduce LJ epsilon using coot.set_refinement_lennard_jones_epsilon() by a factor of 100 or so. And then restore it and re-refine the same residues.

Zone Refinement

# Enable immediate replacement
coot.set_refinement_immediate_replacement(1)

# Refine zone
coot.refine_zone(
    imol,
    chain_id,
    start_resno,
    end_resno,
    ""  # alt conf
)

Validation and Correlation

Check Residue Quality

# Get density correlation for specific residue
correlation = coot.density_correlation_analysis_scm(imol, chain_id, resno, ins_code)
# Returns dict with 'all-atom' and 'side-chain' correlations

# Get worst residues
worst = coot.get_n_residues_with_worst_density_fit(imol, n_residues)
# Returns list of [chain_id, resno, inscode, correlation]

Correlation Targets

Good fit:

• All-atom correlation: > 0.8
• Side-chain correlation: > 0.8

Poor fit (needs attention):

• All-atom correlation: < 0.5
• Side-chain correlation: < 0.5

Common Crash Scenarios to Avoid

Threading/Rendering Conflicts

Problem: Rapid-fire refinement operations while graphics are rendering can cause memory corruption in GTK rendering pipeline.

Symptoms:

nanov2_guard_corruption_detected
gdk_gl_texture_new_from_builder
gtk_gl_area_snapshot

Solution: Use set_refinement_immediate_replacement(1) for synchronous operation

Asynchronous Refinement Without Accept

Handling refine_residues_py() Return Values

refine_residues_py() returns ['', status, lights] where status is a GSL minimiser code:

• 0 (GSL_SUCCESS): converged — done.
• -2 (GSL_CONTINUE): not yet converged — call refine_residues_py() again (once or twice more as needed).
• 27 (GSL_ENOPROG): no progress — stop, refinement is stuck.

# Correct pattern for robust refinement:
for _ in range(3):
    result = coot.refine_residues_py(imol, residue_specs)
    if result and result[1] != -2:
        break
lights = result[2] if result else []

Multi-Line Code Limitation

Coot only returns values if code is a single line:

Doesn't work:

x = 5
y = 10
x + y  # Won't return value

Workaround:

# Call 1: Define function
def calculate():
    x = 5
    y = 10
    return x + y

# Call 2: Execute function
calculate()  # Returns 15

Systematic Residue Fixing Workflow

# 1. Enable immediate replacement
coot.set_refinement_immediate_replacement(1)

# 2. Find worst residues
worst = coot.get_n_residues_with_worst_density_fit(0, 10)

# 3. For each poor residue:
for residue in worst:
    chain_id, resno, inscode, corr = residue

    # Build CID
    cid = f"//{chain_id}/{resno}"

    # Try rotamer fix
    coot.auto_fit_best_rotamer(cid, "", 0, 1, 1, 0.1)

    # Refine in context
    coot.refine_residues_using_atom_cid(0, cid, "SPHERE", 4000)

    # Check improvement
    new_corr = coot.density_correlation_analysis_scm(0, chain_id, resno, inscode)
    print(f"{cid}: {corr:.3f} → {new_corr['all-atom']:.3f}")

Refining with Secondary Structure Restraints

When adding residues in a known secondary structure conformation (e.g. a helix or strand), use set_secondary_structure_restraints_type() to maintain that geometry during real-space refinement. Without this, refine_residues_py() treats residues independently and the conformation can distort away from the intended geometry if the density doesn't strongly support it.

Secondary structure restraint types

• 0 — no restraints (default)
• 1 — alpha helix (restrains i→i+4 hydrogen bond geometry)
• 2 — beta strand

Pattern: always bracket the refinement call

# Set BEFORE refinement
coot.set_secondary_structure_restraints_type(1)  # 1 = alpha helix

coot.refine_residues_py(imol, residue_specs)

# Reset AFTER refinement - critical, or all subsequent refinements
# will use helix restraints unintentionally
coot.set_secondary_structure_restraints_type(0)

Example: add and refine a 6-residue helix

coot.set_refinement_immediate_replacement(1)
coot.set_secondary_structure_restraints_type(1)

residue_specs = [["A", resno + i, ""] for i in range(6)]
coot.refine_residues_py(imol, residue_specs)

coot.set_secondary_structure_restraints_type(0)

Common mistake

Calling refine_residues_py() directly after building helical residues without setting the restraint type — the helix geometry will not be maintained during refinement.

Common Functions

Refinement

• auto_fit_best_rotamer(cid, alt_conf, imol, imol_map, use_rama, rama_weight) - Fix rotamer
• refine_residues_using_atom_cid(imol, cid, mode, radius) - Sphere/zone refinement
• refine_zone(imol, chain, start, end, alt_conf) - Refine residue range
• set_refinement_immediate_replacement(istate) - Enable synchronous refinement

Validation

• density_correlation_analysis_scm(imol, chain, resno, inscode) - Get correlation
• get_n_residues_with_worst_density_fit(imol, n) - Find problem residues

Other

• pepflip(imol, atom_cid, alt_conf) - Flip peptide